For the next job today we are on the Warwick Road in Kenilworth to configure an in house broadband network including at least 2 Wireless Access Points to allow the wireless to work on all 3 floors of the Building.
Moving computers in Kenilworth
This afternoon we are at a customer in Kenilworth to help them reinstall their computer systems after a house move.
This required a Wireless USB Adapter to get it all working now, But it seems we may be back in the next few weeks to setup a wireless access point system as at the moment the wireless only Covers 1/3rd of the house
Under Warranty ADSL Wireless Modem Router
This Afternoon im at Aztec Design on Aragon drive just off of the Mtyon Road in Warwick it seems the ADSL Router we fitted here with an Bridged access point system to cover the house has an odd fault, We discovered that it looses the settings upon power failure and at other intermittant times. this has been replaced underwarranty and tested all seems well
Installing a Wireless Bridge Access Point System in Warwick
Today we are in Warwick just off of the Myton Road with Aztec Design installing a Wireless Bridge system of two Access Points, The main objective of this is to share the Buildings Internet connection in the office on the side of the house with with the rest of the building, We managed to accomplish this using only 2 access points one which has to be wired to the main router and the other in a strategic location in the centre of the house on route to the room requiring access.
Access Point setup / Wireless Bridge Installations
We are now able to offer an installation service for bridged or single Access point setup.
Bridging access points is very useful for larger buildings that require full coverage of a wireless network or buildings with metal objects embeded in the walls as a way of moving the radio around the problem this requires a minimum of 2 Wireless access points with a bridge capacity.
Single access Points are mainly used to add wireless capability to an existing wired network system.
The access points are not very big typically about A5 in size and approximately 2 cm tall although you still need to allow room for the aerial at the back most can be used wall mounted as well as free standing.
Installing an access point system in Wellesbourne
This Morning we are on Mountfield Crescent in Wellesbourne installing a Wireless Bridge system of Access Points, The main objective of this is to share the Buildings Internet connection in an office with a room at the opposite end of the House , We managed to accomplish this using only 2 access points one which has to be wired to the main router and the other in a strategic location on route to the room requiring access, When we tested this setup we found we had also gained internet access in the summer house at the end of the garden.
